Double Towel Racks – The Easy Way To Increase Space

Bathrooms almost always pose a storage challenge. They often have minimal space to do all the jobs we need to do in there and to store everything we use while we're in there.

When a bathroom is shared by a couple of people, or even an entire family, unique storage challenges come up, and they require unique solutions. When, say, four people use the same room for bathing, an obvious problem is: where do you put all the towels? Bathroom hardware manufacturers came up with a better solution: double towel racks.

A traditional single towel rack provides sufficient space to dry one towel. If you've got four people using four towels each day, and you have a typical bathroom, you'll need a wall covered with towel rods to provide enough drying space.

Double towel racks provide an innovation solution to this all-too-common bathroom storage problem. You'll find double towel racks come in traditional finishes like polished chrome and polished and antique brass, and popular finishes like brushed nickel and oil-rubbed bronze. You can find economic versions of double towel racks in unfinished wood and ceramic-and-plastic. Regardless of the amount the wall space you have available to install this hardware, you'll find one to fit your space; They come in the range of standard sizes.

If your bathroom is short on storage, you'll usually be open to considering any new space-saving solutions. You can find bathroom suites with a double towel racks installed below. Imagine-in the space where you could normally dry a towel or two, you can double your hanging space, and have room to store a few fresh folded towels and other bathroom essentials, too.

Double towel racks are an excellent solution when you've got lots of damp towels to handle, but other solutions do exist:

• Install a row of pegs or hooks along the wall of the bathroom.
• Install one or more multi-prong hooks on the back of the bathroom door.
• Buy a shower curtain rod with a towel rack incorporated in its design.
• When you purchase shower doors, look for ones where the handles double as towel bars.
• Install suction-cup hooks inside the tub surround.
• Place a swing-arm towel bar to the wall next to your tub or shower. This way, the towel bars extend into the room; They are not limited to hanging against a wall.
• Hang a hook over the bathroom door, linen closet door, or the door of the water closet. These over-door hooks come in single, double, and multiple hook versions in colors and finishes that either stand out or blend in.
• Repurpose an old-style coat rack and use it to hang towels in the bathroom. It takes up only a single square foot of precious floor space.
• If you want to add furniture to your bathroom, look for a hall tree, which is usually reserved for use in the foyer or a mudroom. They come in many styles and finishes, equipped with hooks, mirrors, storage benches, and shelves.
• If you've fortified enough to have a sizable linen closet in your bathroom, visit the closet organization section of your home improvement store. These stores have trained personnel who can help you look at the space you have and redesign it to suit your needs.

Installing a couple of double towel racks can provide a simple way to add storage space to your bathroom. But investigate all the possible storage options for your unique bathroom design challenges. You're not limited to one solution-think creatively and combine them to make a bathroom that works for you.

Posted in general | Comments Off on Double Towel Racks – The Easy Way To Increase Space

Best Windows 7 Optimizer That Can Stabilize and Improve Your Computer Performance

A system optimizer is a software designed to maintain the performance of your computer, fix software related problems and keep your computer stable and secure. The need of a system optimizer software in Microsoft Windows7 operating system is high. This is because Windows 7 itself is unable to maintain all the mentioned aspects without the help of third-party products.

We are going to learn what exactly Windows 7 optimizer software is.

The best Windows 7 optimizer software shall include all the following features:

1. Registry Cleaner to fix the registry related issues

2. System Cleaner to clean unnecessary stuff and free-up the disk space

3. Registry Defragmenter to defrag the system registry

4. Startup Manager to control the programs running when you turn on your computer

5. Backup & Restore feature to restore unfavourable registry changes

“Registry Cleaner” to Fix the Registry Related Issues

Windows Registry is a vital component in Microsoft Windows 7. It contains information stored by your operating system and installed software. For example, the default settings, changes you made to your computer, system information, runtime data, etc. are stored.

Registry Cleaner is a software that finds the junk entries in the registry, and repairs them as far as possible. Unfortunately, Windows 7 does not include a built-in registry cleaner. The registry cleaner software included in the best Windows 7 optimizer lets you scan the genuine registry problems and correct them. It thereby helps avoiding many runtime errors and problems, such as, File Not Found, etc.

“System Cleaner” to Clean Unnecessary Stuff and Free-Up the Disk Space

A System Cleaner software lets you find the files and stuff that have unnecessarily occupied the hard disk space.

The tasks, like installing a program, uninstalling, repairing or updating the existing programs, and even just running the installed programs many times create temporary files, log files that need not be kept after the corresponding operation is performed. Sadly, many programs do not itself delete such files and stuff and thus your hard disk space is used for such unproductive stuff. Using a system cleaner software included in best Windows 7 optimizer, you can easily and safely delete such temporary stuff.

“Registry Defragmenter” to Defrag the System Registry

You know the importance of the registry in Windows 7 operating system, as already discussed. The continuous access of a number of programs to the registry results in its fragmentation. It reduces the system performance and freezes your computer.

The best Windows 7 optimizer software includes a registry defragmenter that enables analyzing the registry fragmentation and afterwards defrags it. A reboot is required to perform this process and all other running programs and services must be terminated.

“Startup Manager” to Control the Programs when you Turn on your Computer

Running too many programs at the Windows startup, results in system freezing and slow performance. A Startup Manager, included in best Windows 7 optimizer, lets you monitor and control the programs that run each time your computer is started. It lets you disable or delete the unwanted program entries and enable only those who are necessary.

Backup & Restore Feature to Restore the Unfavourable Registry

While doing all the above steps, care must be taken that you have followed some precautionary measures first, so that any unfavourable registry change can be later restored and unwilling situations can be easily avoided. The best Windows 7 optimizer should include such a feature.

Best Windows 7 Optimizer Recommended by Worldwide Experts

Posted in general | Comments Off on Best Windows 7 Optimizer That Can Stabilize and Improve Your Computer Performance

Advantages and Disadvantages of Professional Shopping Cart Software

Advantages & Disadvantages of professional shopping cart software As e-Commerce is becoming a regular technique in the business industry it appears that more and more software development firms are developing professional shopping cart software to be released in the market. There is currently a huge range of free shopping cart software that has been released, and it seems that most e-Commerce website owners prefer these free systems over paid for professional shopping cart software. In this article we are going to look at the advantages and disadvantages of professional shopping cart software.

Advantages

• Even though you will have to pay for the solution, you get a cart package that has been fully developed, tested and used in the real working world by other e-Commerce websites. If the solution is used by a popular website service then the chances are it has been under more than enough testing to be deemed ready for use.

• Professional shopping cart software will be supported by the people who developed it. A lot of free solutions out there are simply developed and then discontinued as the freelance developers move onto their next project. Support is essential if you are going to want upgrades as mentioned in our next point.

• As the system is supported, the development team are likely to fix any bugs that may occur and provide patches and security fixes. This means the shopping cart software will only get better as time goes on and furthermore improve your e-Commerce website.

• Your site is likely to be more secure when using a professional software solution as in most cases the it developed house private content management systems. This improves security as public content management systems such as WordPress are constantly under threat from hackers as they try to compromise the free source code.

• Another huge advantage of using professionally developed software in e-Commerce is that they will already support a huge range of different payment options for your customers. There are various carts – that only offer PayPal for payment by standard, and it can take a very long time to find plug-ins or figure out how to add other methods yourself. With professional software you can save time and possibly money as it is all included.

Disadvantages

• Your e-Commerce venture might be a small time project and professional cart does cost money which you may not have. In this case you may have to make do with a free shopping cart solution. The good part of conducting business online is that after you have made profit with the free system you can reinvest your money to buy a professional package.

• You trust the developers to do everything they promise to ensure the best experience. It might be slightly difficult to use at first and you might have to spend some time getting used to the bespoke system. You also have to understand that you are vulnerable until patches are made if a security flaw is found.

Posted in general | Comments Off on Advantages and Disadvantages of Professional Shopping Cart Software

The Importance Of Excel In The Workplace

Excel is perhaps the most important computer software program used in the workplace today. That’s why so many workers and prospective employees are required to learn Excel in order to enter or remain in the workplace.

From the viewpoint of the employer, particularly those in the field of information systems, the use of Excel as an end-user computing tool is essential. Not only are many business professionals using Excel to perform everyday functional tasks in the workplace, an increasing number of employers rely on Excel for decision support.

In general, Excel dominates the spreadsheet product industry with a market share estimated at 90 percent. Excel 2007 has the capacity for spreadsheets of up to a million rows by 16,000 columns, enabling the user to import and work with massive amounts of data and achieve faster calculation performance than ever before.

Outside the workplace, Excel is in broad use for everyday problem solving.

Let’s say you have a home office. You can use Excel to calculate sales tax on a purchase, calculate the cost of a trip by car, create a temperature converter, calculate the price of pizza per square inch and do analysis of inputted data. You can track your debt, income and assets, determine your debt to income ratio, calculate your net worth, and use this information to prepare for the process of applying for a mortgage on a new house. The personal uses for Excel are almost as endless as the business uses for this software – and an Excel tutorial delves into the practical uses of the program for personal and business use.

The use of spreadsheets on computers is not new. Spreadsheets, in electronic form, have been in existence since before the introduction of the personal computer. Forerunners to Excel and Lotus 1-2-3 were packages such as VisiCalc, developed and modeled on the accountant’s financial ledger. Since 1987, spreadsheet programs have been impacting the business world. Along the way, computerized spreadsheets have become a pervasive and increasingly effective tool for comparative data analysis throughout the world.

Today, end users employ Excel to create and modify spreadsheets as well as to author web pages with links and complex formatting specifications. They create macros and scripts. While some of these programs are small, one-shot calculations, many are much more critical and affect significant financial decisions and business transactions.

Widely used by businesses, service agencies, volunteer groups, private sector organizations, scientists, students, educators, trainers, researchers, journalists, accountants and others, Microsoft Excel has become a staple of end users and business professionals.

The beauty of Excel is that it can be used as a receiver of workplace or business data, or as a calculator, a decision support tool, a data converter or even a display spreadsheet for information interpretation. Excel can create a chart or graph, operate in conjunction with Mail Merge functions, import data from the Internet, create a concept map and sequentially rank information by importance.

Excel offers new data analysis and visualization tools that assist in analyzing information, spotting trends and accessing information more easily than in the past. Using conditional formatting with rich data display schemes, you can evaluate and illustrate important trends and highlight exceptions with colored gradients, data bars and icons.

Indeed, Excel can be customized to perform such a wide variety of functions that many businesses can’t operate without it. Excel training has become mandatory in many workplaces; in fact, computer software training is a must for any workplace trying to keep up with the times.

Let’s say you’re an employer with 97 workers, 17 of whom called in sick today, and you want to know the percentage represented by absentees. Excel can do that. You can learn Excel and use it to determine the ratio of male to female employees, the percentage of minorities on the payroll, and the ranking of each worker by compensation package amount, including the percentages of that package according to pay and benefits. You can use Excel to keep track of production by department, information that may assist you in future development plans. You can create additional spreadsheets to track data on vendors and customers while maintaining an ongoing inventory of product stock.

Let’s say you want to know your business production versus cost. You don’t have to be a math wiz – you just have to learn Excel. Excel allows you to input all of the data, analyze it, sort it according to your customized format, and display the results with color, shading, backgrounds, icons and other gimmicks that offer time-saving assistance in later locating precisely the information desired. If this spreadsheet is for presentation purposes, Excel helps you put it together in such a visually appealing way that the data may seem to pop and sparkle.

The single most important thing an employer may do is learn Excel – it is one of the most essential tools of the workplace.

Excel and Microsoft are trademarks of Microsoft Corporation, registered in the U.S. and other countries. Lotus is a registered trademark of International Business Machines Corporation in the U.S. and/or other countries.

Posted in general | Comments Off on The Importance Of Excel In The Workplace

The Advantages of Having Personal Productivity Software

Personal productivity software is an application that no business should be without. This is because of the simple fact that this piece of software makes a great contribution when it comes to ensuring productivity in the workplace. But if you are not too convinced about the importance of purchasing personal productivity software just yet, well, this is actually normal. A lot of business men do become wary when presented with the notion of purchasing such software because computer software is a bit pricey in the market right now. However, when presented with the many benefits businesses enjoy with these software applications, the activity of convincing businessmen becomes very, very easy to do.

So, why exactly do you need personal productivity software in running your business? First of all, this piece of software can give any type and size business the professional touch it needs. The software comes with applications and programs that make it very easy for you to produce professional looking letterheads, marketing reports, brochures, mailing campaigns, and the like. Even the simple act of developing professional looking paychecks is easily done with the use of such software as well. And this is just one of the minor benefits that come with such software!

When you get the basic package, you actually get a word processor, a spreadsheet application, presentation software, and the like. For a more cost-efficient option, you could consider getting one of those suites that contain a number of these tools. This way, you are sure to get more value for your money. Some examples of these suites include Microsoft Office, Sun Staroffice 8, Microsoft Works, or Corel WordPerfect Office. An interesting fact about Microsoft Works is that it actually comes free with personal computers. Aside from these suites, you can also choose to get supplementary software packages that can make your whole life easier.

One of the popular software packages includes QuickBooks. This choice is popular because it is known to be very efficient in handling and managing inventory and business finances, such as payroll and benefits packages. Now, with all these abilities, you have to be sure to allot a hefty budget for your suite of tool and the additional applications and programs you would be getting. The typical price for suites and the individual applications range from a hundred to five hundred dollars. So, if your PC is meant for more than just doing the regular email and the basics on word processing, then you should consider this option thoroughly.

You may also be worried about the hidden and recurring fees that might come with having personal productivity software installed in your system. Yes, they do come with long term costs, but these are just minimal when you compare them to the benefits you would come to enjoy with the software. An upgrade would occasionally be needed, especially after a few years or so with your own application suite. Plus, your business should be growing in a few years, right? Thus, it would make much sense to avail of this upgrade, to foster improvement for your company in the business setting. Do not worry too much about upgrade expenses because they would definitely be lower than that of the original purchase.

Posted in general | Comments Off on The Advantages of Having Personal Productivity Software

Wide Area Network (WAN)

Types and Characteristics of WANs

What is a WAN?

There are two prevailing definitions of a Wide Area Network (WAN). The book definition of a WAN is a network that spans large geographical locations, typically to interconnect multiple Local Area Networks (LANs). The practical definition of a WAN is a network that traverses a public network or commercial carrier, using one of several WAN technologies

What are its Main Components?

The main components for a WAN are routers, switches and modems. These components are described below in the hardware section.

CPE – Devices on the subscriber contracts are called customer premises equipment (CPE).
The subscriber owns the CPE or leases the CPE from the service provider. A copper or fiber cable connects the CPE to the service provider's nearest exchange or central office. This cabling is often called the local loop, or "last-mile".

DTE / DCE – Devices that put data on the local loop are called data circuit-terminating equipment, or data communications equipment (DCE). The customer devices that pass the data to the DCE are called data terminal equipment (DTE). The DCE primarily provides an interface for the DTE into the communication link on the WAN cloud.

Hardware

In a WAN you will need various types of hardware components for it to function. The typical items of hardware that you will need in a WAN are:

Router – An electronic device that connects a local area network (LAN) to a wide area network (WAN) and handles the task of routing messages between the two networks. Operates at layer 3, and makes decisions using IP addresses.

Switch – A switch is a network device that selects a path or circuit for sending a unit of data to its next destination. Operates at layer 2, and uses MAC addresses to send data to correct destination.

Modem – Short for modulator / demodulator, a modem that enables a computer to communicate with other computers over telephone lines. Operates at layer 1, where signals are converted from digital to analogue and vice versa for transmission and receiving.

Wan Standards

WANs operate within the OSI model using layer 1 and layer 2 levels. The data link layer and the physical layer. The physical layer protocols describe how to provide electrical, mechanical and functional connections to the services provided by the ISP. The data link layer defines how data is encapsulated for transmission to remote sites.

Encapsulation

Encapsulation is the wrapping of data in a particular protocol header. Remember that WANs operate at the physical layer and the data link layer of the osi model and that higher layer protocols such as IP are encapsulated when sent across the WAN link. Serial interfaces support a wide range of WAN encapsulation types, which must be manually specified. These types include SDLC, PPP, Frame delay etc. Regardless of WAN encapsulation used it must be identical on both sides of the point to point link.

Packet and Circuit Switching

Circuit switching and packet switching are both used in high-capacity networks.
The majority of switched networks today get data across the network
Through packet switching.

Circuit-switching is more reliable than packet-switching. Circuit switching is old and expensive, packet switching is more modern.

General Routing Issues

What is a Routing Protocol?

A routing protocol is a protocol that specifies how routers communicate and exchange information on a network. Each router has prior knowledge of its immediate neighbors and knows the structure of the network topology. The routers know this because the routing protocol shares this information.

Protocol

RIP (Routing Information Protocol) was one of the most commonly used protocols on internal networks. Routers use RIP to dynamically adapt changes to the network connections and communicate information about which networks routers can reach and the distance between them. RIP is sometimes said to stand for Rest in Pieces in reference to the reputation that RIP has for breaking unexpectedly and rendering a network unable to function.

Routing Algorithms

Distance Vector

This type of routing protocol requires that each router simply inform its neighbors of its routing table. The distance vector protocol is also known as the bellman-ford algorithm.

Link State

This type of routing protocol requires that each router maintain a partial map of the network. The link state algorithm is also know as Dijkstra's algorithm.

IGRP

IGRP is a type of distance vector routing protocol invented by cisco used to exchange routing data in a autonomous system. Distance vector protocols measure distances and compare routes. Routers that use distance vector must send all or a portion of their routing table in a routing update message at regular intervals to each neighbor router.

Addressing and Routing

What does routing mean?

Routing is the process of deciding how to move packets from one network to another.
The directions also known as routes can be learned by a router using a routing protocol then the information is passed from router to router along the route of the destination.

IP Address's

Every machine connected to the internet is assigned an IP address. An example of an IP address would be 192.168.0.1. IP addresses are displayed in decimal format to make it easier for humans to understand but computers communicate in binary form. The four numbers that separate an IP address are called Octets. Each position consists of eight bits. When added to together you get 32 ​​bit address. The purpose of each octet in an IP address is to create classes of IP addresses that can be assigned within a network. There are three main classes that we deal with Class A, B and C. The octets of an IP address are split into two parts Network and Host. In a class A address the first octet is the network portion, this determinates which network the computer belongs to, the last octets of the address are the hosts that belong to the network.

Sub netting

Sub netting allows you to create multiple networks within a class A, B or C address. The subnet address is the address used by your LAN. In a Class C network address you would have a subnet mask of 255.255.255.0. A subnet mask identifies which portion is network and which is host. For example 192.168.6.15 the first octet three octets are the Network address and the last octet being the host (Workstation). It is important to subnet a network because gateways need to forward packets to other LANS. By giving each NIC on the gateway an IP address and a Subnet mask it allows the gateways to route packets from LAN to LAN. Once the packet arrives at its destination, the gateway then uses the bits of the subnet portion of the IP address to decide which LAN to send the packets.

Circuit Switched Leased Lines

A circuit switched network is one that establishes a dedicated circuit (or channel) between nodes and terminals before the users may communicate. Here are some terminologies associated with a Circuit switched network.

Frame relay is a telecommunication service designed for cost-efficient data transmission between local area networks (LANs)

Basic rate interference is a service used by small business for internet connectivity. An ISDN BRI provides two 64 Kbps digital channels to the user.
Primary rate interface (PRI) is a telecommunications standard for carrying voice and data transmissions between two locations
All data and voice channels are ISDN and operate at 64kbit / s

Packet Switching

Http://www.raduniversity.com/networks/2004/PacketSwitching/main.htm – _Toc80455261

Packet switching refers to protocols in which messages are broken up into small packets before they are sent. Each packet is then transmitted over the Internet. At the destination the packages are reassembled into the original message. Packet switching main difference from Circuit Switching is that that the communication lines are not dedicated to passing messages from the source to the destination. In Packet Switching, different messages can use the same network resources within the same time period.

Http://en.wikipedia.org/wiki/Asynchronous_Transfer_Mode

Asynchronous Transfer Mode (ATM) is a cell relay, packet switching network and protocolwhich encodes data into small fixed-sized cells.

ISDN is used to carry voice, data, video and images across a telephone network. ISDN stands for integrated services Digital Network. Isdn also provides users with a 128kbps bandwidth. This is done through frame relay. Frame relay complements and provides a service between ISDN, which offers bandwidth at 128 Kbps and Asynchronous Transfer Mode which operates in somewhat similar fashion to frame relay but at speeds from 155.520 Mbps or 622.080 Mbps. Frame relay is based on the older X.25 packet switching technology and is used to transmit analogue signals such as telephone conversations.

PSDN stands for packet switched data network and is a data communication network. Packet switched networks do not establish a physical communication signal like the public telephone circuit (circuit switched network) Packets are sent on a fixed length basis and assigned with a source and a destination address. The packages then explicitly on the routers to read the address and route the packets through the network.

Mobile and Broadband Services

Digital Subscriber Line (DSL) is mainly used to bring high bandwidth connections to homes and small business's over a copper wire telephone line. This is can only be achieved if you stay within the range of the telephone exchange. DSL offers download rates of up to 6mbps allowing continuous transmission of video, audio and 3D effects. DSL is set to replace ISDN and compete with the cable modem in providing multimedia to homes. DSL works by connecting your telephone line to the telephone office over copper wires that are twisted together.

Asymmetric Digital Subscribers Line is most commonly used for home users. It provides a high download speed but a lower upload speed. Using ADSL, up to 6.1 megabits per second of data can be sent downstream and up to 640 Kbps upstream.

Http://en.wikipedia.org/wiki/Symmetric_Digital_Subscriber_Line

Symmetric Digital Subscriber Line is a digital subcriber line which runs over one pair of copper wires. The main difference between ADSL and SDSL is the difference in upload and download speeds. SDSL allows the same upstream data rate and downstream data rate as ADSL upstream can be very slow.

[Http://searchnetworking.techtarget.com/sDefinition/0],,sid7_gci558545,00.html

HDSL High bit-rate Digital Subscriber Line, one of the earliest forms of DSL, is used for wideband digital transmission within a corporate site and between the telephone company and a customer. The main characteristic of HDSL is that that provides equal bandwidth in both directions.

IDSL is a system in which data is transmitted at 128 Kbps on a regular copper telephone line from a user to a destination using digital transmission.

The Local Loop enables operators to connect directly to the consumer via copper local loops and then add their own equipment to offer broadband and other services. This process involves operators accessing local exchange buildings to connect to a network of copper lines which connect them to homes and businesses. BT is an Example of a Local Exchange. The local loop connecting the telephone exchange to most subscribers is capable of carrying frequencies well beyond the 3.4 kHz upper limit.

Benefits of using DSL

DSL can provide a virtual instantaneous transmission of voice, data and video over ordinary copper phone lines. A DSL connection can eliminate delays while waiting to download information and graphics from the Internet. It provides users with a cost effective high speed Internet connection. Another benefit is that a DSL connection is always on-line (like a LAN connection) with no waiting time for dialing or connecting.

There are now more than 10 million broadband connections in the UK. By December 2005 there were 9.792 million broadband connections in the UK and the average broadband take up rate during the three months to December was more than 70,000 per week.

Posted in general | Comments Off on Wide Area Network (WAN)

Corel DRAW – Best Desktop Publishing Software

Corel DRAW is a supreme supplier of graphics software, including the popular Corel DRAW program. Corel DRAW has tools that allow the user to both create and edit images. The type of desktop publishing tools that you use will depend on the type of project. For more information and assistance, use the Corel website.

Corel DRAW is the best Desktop publishing software that empowers users to create illustrations containing graphics, text and photographs. Corel has an extensive range of tools which enable the user to edit any shape or character with ease and precision, fit text to curves and create custom color separations. It is developed and marketed by Corporation of Ottawa. This tool can open files: Adobe PageMaker, Microsoft Publisher and Word, and other programs can print documents to Adobe PDF using the Writer printer driver, which such software can then open and edit every aspect of the original layout and design.

Several innovations to vector-based illustration originated with Corel: a node-edit tool that operates differently on different objects, fit text-to-path, stroke-before-fill, quick fill/stroke color selection palettes, perspective projections, mesh fills and complex gradient fills.

One of this software’s many strengths is the huge range of over 1,000 fonts that it comes with, provided in both TrueType and Postscript Type 1 format. Corel differentiates itself from its opponent in a number of ways: The first is its positioning as a graphics suite, rather than just a vector graphics program. A full range of editing tools allow the user to adjust contrast, color balance, change the format from RGB to CMYK, add special effects such as vignettes and special borders to bitmaps. Bitmaps can also be edited more extensively using Corel PhotoPaint, opening the bitmap directly from Corel and returning to the program after saving. It also allows a laser to cut out any drawings.

Expert believed it was the first of the Windows-based drawing programs and has built on this early start to become far-and-away the dominant drawing package on the PC. Its biggest strength – and its biggest potential limitation – is its all-encompassing approach. In the past this has led to accusations of unfocused bloating, but with version 7.0 Corel has addressed the criticisms with a far tighter and better rationalized program. Even so, there’s a huge range of functionality to cover.

Corel DRAW Download was originally developed for Microsoft Windows and currently runs on Windows XP, Windows Vista, and Windows 7. The current version, X5, was released on 23 February 2010.

Posted in general | Comments Off on Corel DRAW – Best Desktop Publishing Software

How Useful is CAD Software to Engineers and Architects?

The emergence of advanced technology has made people today dependent on machines. Using computers and software, for example, is a very common illustration of this. Computer experts are coming up with more and more software to make more and more jobs easier.

A more specific illustration of this can be found in the modern approach towards engineering and architecture. These days, professionals in these fields use CAD computer software which is a program that allows them to create designs faster, easier and with more accurate measurements. Aside from the convenience that CAD software brings, it also helps put architects and engineers ahead of their competitors. CAD, which can render designs that are two-dimensional or three dimensional, stands for Computer Aided Design and has been in use since 1982.

So how does CAD computer software work? And what does it do exactly to help engineers and architects? The program is actually multifaceted in the sense that there are many ways it can help. To make CAD work will require, however, a careful study of its features and the many ways it can be used. It is rather a complex yet flexible and highly functional program.

This article will not be enough to discuss the various ways that CAD works but pinpointing its advantages could give some very good ideas. One great advantage of CAD computer software is its easy-to-use tools in the creation and alteration of designs. Obviously, this is so much better than the old fashioned way of using a pencil and eraser directly on paper. This method of designing is obviously so much easier and engineers and architects simply have more time to finish other tasks. In other words, high productivity is going to be the main end result of using CAD.

Before the design is actually printed on paper, CAD also allows both the design professional and the client to preview what has been finished so far. Any alterations can be made simply by manipulating the drawing through the use of the software. With CAD, it is so much easier to spot errors because the designs can be rendered exactly as they would be in reality. Hence, modifications can be done even before printing, thus, allowing one to save.

With the tough competition that everyone has to face these days, it is wise to take advantage of new technologies that can help put them ahead in the race. While traditional methods hold a significant part in the history of design, advanced tools such as CAD software should only be welcomed as man’s way of furthering development in a field of expertise that he himself has created long ago.

Posted in general | Comments Off on How Useful is CAD Software to Engineers and Architects?

What Are the Advantages of Using a Web Based Project Management System

Every project needs a large number of people for the completion of any task. Projects are of several kinds, and there capacity level is also variant. In order to help the managers control all tasks, management system was introduced. Project management system is used to make the managers feel easy. The first type of a project management system is manual.

However, nowadays much web-based project management software is available in the market. There is no need to process data manually. Everything is computerized; managers just have to enter the basic information into the system. Nowadays, lots of project managers are opting for web-based project management systems. They have access to the web-based project management software’s, and tools.

Using a web-based management system has several benefits. Project managers can reach their computers from anywhere, not only computers, but they can also contact their team members and check the progress of work. Discussing any problems that arise with the team is a lot easier. Team members can also interact with each other via e-mail.

Project scheduling is the basic solution of web-based task management plan in a large organisation. In many ways a web-based activity management plan can help your managers achieve optimum results. Whether a project is based on finance, marketing, construction, or information technology (IT), and web-based project management plan can help t.

Web-based activity management plan helps managers to make a proper scheduling plan of the project. Web-based software has many tools which help in managing time, and activities. The software includes spreadsheets, network diagrams, or Gantt charts to control the task management scheme.

In project-management scheme, HTML, ASP, or PHP are the supported languages coded into the software, and browser. The team can access it through a web browser. Moreover, main software is installed on to the server for multiple clients.

Project management scheme helps managers to supervise all the team easily. If the manager finds any team member late in the completion of the task, he/she can track the problem, and change that member, thus, avoiding any delays.. Web-based project-management-system enables the mangers to distribute the workload according to the capability of human resource (HR). In addition, he/she can monitor the performance of each person involved in the completion of a job. This web-based project management system also enables the manager to measure the achievement, and performance of the team in accordance to the strategy chalked down for completion, or achievement of the target.

Web-based project-management system keeps the human resources satisfied from the point of view that whatever performance he/she is given is being registered, and is not over looked. If, a company is using a custom-made programme, which is flexible to different projects, it remains cost effective, and is not a burden on the bottom line. For different projects, which have different dynamics, companies may need a tailor-made programme for them, This can be a little costly, but it ensures better management, proper monitoring, and timely completion of tasks, ultimately ensuring good performances. Nowadays, this web-based project software is a very important tool for the management of any project. Furthermore, using the correct project management scheme, and software, can help managers to manage their project smoothly, and effectively.

Posted in general | Comments Off on What Are the Advantages of Using a Web Based Project Management System

Different Types of Hospitality Management Systems

Hospitality management systems are the software that runs your hospitality business. From the food ordering system in your restaurant, to online accommodation booking software, it enables efficient communication and management of your operation, ultimately increasing revenues.

With a range of hospitality management systems to choose from, understanding what is offered is important in order to find the right system that is tailored for your needs and budget. Depending on the type of operation you manage, you should consider the following systems, their advantages and suitability to your company.

Accommodation management software:

Accommodation software packages range from those aimed at B&Bs and small motel owners to ones for running big hotels, clubs and resorts. The basic package offers simple guest and room management, while the more complex ones cover every aspect needed to manage and run a big hotel chain. This includes reservations, service, retail, inventory, staff roster and training, accounting and much more.

Front desk: A front office software package should enable reception staff to keep track of all bookings, state of rooms, guest details and charges, coordinate restaurant reservations for guests, plan housekeeping duties and process guest check-in and check-out. They should also provide a means to communicate effectively with all travel agents and activity operators linked to the system. Features you should look out for include: Reports for arrivals & departures on a specific date. Guest ledger and reservation details, including activities and special requests. Room rates, discounts, package deals, group bookings, etc. Visual schematic of hotel rooms and status. Visual schematic of calendar with room availability. Facility for printing check-in cards for guests. Flexibility in re-assigning guests to different room. Facility to easily add charges to rooms from restaurants, spa, gift shop, etc. Incorporate all payment options upon check-out and print receipt. Print work roster for staff Facilities for storing guest history Communicate efficiently with reservation and travel agents

Housekeeping/maintenance software: Easy-to-use software for the housekeeping and maintenance departments of your accommodation place will increase the efficiency of cleaning and servicing of rooms. Main features of this module will be: Keeping track of room status – dirty, cleaned, inspected, check-ins and check-outs, etc. All information such as number of guests, number of beds, length of stay, special requests (e.g. baby cot, high chair) should be visible to both housekeeping staff and management. Staff can enter maintenance issues as they arise, and those are automatically sent to the maintenance department. Staff can request cleaning materials and toiletries ordered. Staff can keep track of laundry status for uninterrupted linen supply.

Online reservation system: This software package is essential to any accommodation place. It helps you increase direct online bookings instantly. Prospective guests can view hotel rooms (size, choice of beds), availability and prices, plus services and facilities offered. The systems should have instant confirmation of credit card payments or other secure online payment method. After payment of deposit and confirmation by email, guests should be able to login to view or change their reservation details. Cancellation policies should be stated, airport transport options mentioned.

Hospitality management systems for point of sale (POS) operations: This includes restaurants and bars, the hotel gift shop, spa, tour desk and other guest services. It should have the options of direct payment or charge to room. Apart from recording normal vending operations, it should include issuing daily transaction reports to management or the accounting office, and a daily revenue report.

In the POS sector there are many operating hospitality management systems catering for the food vendor sector, namely restaurants, cafés, takeaway shops and delis.

Restaurant (POS) management packages. For POS management packages, you have the choice of an off-the-shelf system for restaurants and cafes, where you can set the options that suit your operation, or a customised one, specifically configured for your business. Most systems are quite easy to use and are cost effective. Their features vary, but most offer the following: Order taking, tallying, and cashier options using a hand-held PDA system. Credit-card processing interface Receipts customized for your business. The more advanced systems also offer: Integrating all transactions with your accounting software. Full inventory/stocktaking facility Translation facilities to selected languages.

Administration software: This module is directed at top management and offers access to all levels of the organization. It provides instant access to the data base of all sectors, ensuring total transparency of operations Overseeing and early intervention by senior staff can prevent mistakes being made by inexperienced employees and save money and the reputation of your business. · Other facilities in this package may include:

Tools for setting different rate systems for rooms and services: daily, seasonal, special promotions, etc. Statistical data – percentage occupancy over set periods, and other data used for policy making and customized reports for board meeting presentations. Organizing promotions and package deals. Inventory for different departments. Employee accounts and employee training programs

Remember: with the high staff turnover common to the hospitality industry, it is important to choose a system that needs minimal training to use, and has ‘secure areas’, which only authorised personnel (with the proper clearance) may access and use.

Choosing and introducing hospitality management systems for your business is a significant undertaking, both operationally and financially. But once up and running, the system will increase efficiency, cut costs and improve the service in your company. You will have happier staff and happier guests, who will promote your business and ultimately increase your revenue.

Posted in general | Comments Off on Different Types of Hospitality Management Systems